Versión de HTML Básico
2015 GT TECH BOOK
30
KITS LIST
© Cycling Sports Group, Inc.
Retailer Service:
1-800-245-3872,
Retailer Fax:
1-203-846-6616
GT BICYCLES 2015 TECH BOOK- 10/14
Ilustrations are for part reference only, not assembly instructions.
All information is subject to change without notice.
LOCKR Expanding Axle
Removal
A. Loosen the screw (4) 4-6 turns using a T25 Torx key.
B. Tap head of M4 screw (4) to un-seat threaded wedge
(2).
Remove M4 screw (4) and threaded wedge (2) from the
axle (1).
C. Insert a 5mm hex key to twist the wedge (3) free and
remove it (shown). If stuck, insert the long side of a
6mm HEX key (non-ball end) from the threaded end of
axle and tap it out.
D. Insert a 6mm hex key into the axle and turn counter-
clockwise until it can be removed.
Installation
Be sure to inspect the parts for any burrs, scratches or
other damage before assembly. Replace the complete axle
assembly if any damage is found.
■
Apply a high-quality bearing grease to all the parts of
the assembly before installing into the linkage. Be sure
to coat all threads, wedge surfaces and expansion areas.
■
Be sure to use the correct length axle and screw for the
specific location. See above.
■
Insert the axle (1) into the link from the non-drive side.
and tighten it with an 6mm hex to 1.0Nm. Do not
over-tighten.
■
Insert the threaded wedge (2) into the drive side of
the axle and insert the other wedge (3) and screw (4)
opposite and tighten screw with a T25 Torx to 3.0Nm.
Kit Information
AL = 79mm
SL = 46mm
AL = 79mm
SL = 46mm
AL = 103mm
SL = 70mm
SEATSTAY PIVOT
LINK PIVOT
CHAINSTAY PIVOT
M6
1.0Nm
1
a
M5
T25
3.0Nm
2
4
3
AL
SL
Exploded View:
Wedge Removal:
(shown removed from link for clarity)
6mm
1
2
3
CODE
DESCRIPTION
ITEM (QTY)
KG0054N01
KIT HWARE EXP AXLE CS SS FT HELION
1
KG0055N01
KIT HWARE EXP AXLE FT BB LINK HELION
2,3